> For the complete documentation index, see [llms.txt](https://wondle.gitbook.io/wondle-user-guide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wondle.gitbook.io/wondle-user-guide/welcome-to-wondle/dealing_with_lease_damage_results/adding-additional-damage-or-images.md).

# Adding additional damage or images

Use this when damage is missing from the results, or when you want to record something you can see (or know is there) and ensure it’s included correctly.

***

### Quick checklist

* [ ] I selected the **green +** button
* [ ] I chose an **existing image** or **uploaded a new image**
* [ ] I selected the correct **location / damaged part**
* [ ] I selected the correct **damage type**
* [ ] I selected the correct **severity**
* [ ] I saved the change and checked it appears in the final list

***

### 1) Select the green **+** button

1. Select the green **+** button to add a new damage item.

***

### 2) Choose your image source

You can add damage using either:

#### Option A: Use an existing image

* Select an image already captured during the scan.

#### Option B: Upload a new image

* Upload a completely new image from your device.

{% hint style="info" %}
If the scan image isn’t clear enough (tight angles, glare, or distance) or it wasn't detected then uploading a new close-up can make sure the report is still accurate.
{% endhint %}

***

### 3) Follow the manual selection steps

Once your image is selected, follow the same verification flow used for editing: [Verifying and correcting results](/wondle-user-guide/welcome-to-wondle/dealing_with_lease_damage_results/verifying-and-correcting-results.md)

#### Select the location (damaged part)

* Choose the most accurate vehicle location (panel/area) for the damage.

#### Select the damage type

* Choose the category that best matches the damage (for example: scratch, dent, scuff).

#### Select the severity

* Choose the severity that best matches what you can see in the image.

{% hint style="warning" %}
Take your time. Location, type, and severity are the three fields that determine how the damage is recorded in the report.
{% endhint %}

***

### 4) Save and confirm

* Select **Save** to add the damage item.
* Confirm it now appears in your results list and in the final report stage.

***