# Tyres & Wheel damage

## BVRLA Fair Wear & Tear (Cars) 

### Tyres and wheels

#### Tyre wear and damage

* All tyres (including any spare) must meet minimum UK legal requirements and follow the vehicle manufacturer’s recommendations for tyre type, class, size and speed rating.
* Replacement tyres must be to the same specification as those originally supplied.
* There must be **no damage** to sidewalls or tread, and **no cracking**.
* Uneven wear due to under-/over-inflation or incorrect steering geometry is not acceptable.

#### Wheels and wheel trims

* Dents on wheel rims and wheel trims are not acceptable.
* Scuffs up to **50mm** on the total circumference of the wheel rim and on alloy wheels/wheel hubs are acceptable.
* Any damage to the wheel spokes, wheel fascia, or hub of the wheel/alloy is not acceptable.
* There must be **no rust or corrosion** on the alloy wheels/wheel hubs.

#### Spare wheel / tools / tyre inflation kit

* The spare wheel, including ‘spacesaver’, jack and other tools, must be intact, stowed properly and in good working order.
* The emergency tyre inflation kit (if supplied when new) should be in full working order, serviceable and ready for use.
* A canister that has been partially or fully discharged must be replaced.